Seems to require PCIe ASPM Support to be on. 0028: Gives boot errors if onboard Bluetooth is disabled.0033: May disable m.2 slot by default - be sure to re-enable it if you're using it.Disabling legacy boot may give cosmetic errors before the Clover menu starts. 0039: Works well so far - sleep/wake works, no obvious problems.0044: Brought improvements to NVMe SSD speed, but reportedly requires BIOS restore for full effect.0045: Works well so far - sleep/wake works, no obvious problems.It may be a good idea to stay relatively up to date. Some users speculate that bad fan settings cause the NUC to overheat with early BIOS releases. Intel recommends 0039 or higher due to various issues (see the PDF attached to this post).Only if using an m.2 NVMe drive: the OS X NVMe driver (easy to install but implements no power saving and known to crash under certain circumstances) or manually patch your NVMe driver with RehabMan's scripts (a fully working solution but a more involved process to do it).CPU SSDT (pick the correct SSDT for your model).You should now see the application /Applications/Install OS X El Capitan.app When the download finishes and the setup screen appears, Quit the app from the menu bar.Download OS X El Capitan 10.11.4 or greater.8 GB / 2133) because you will need to specify those in order to avoid OS X only seeing half your memory. Note the size and speed of your RAM chips (e.g.If you only use one RAM chip, it should be installed in the bottom slot.A Skylake NUC, model starting with NUC6i3 or NUC6i5.However, it is large enough that it blocks a second USB port on the NUC unless you get a USB hub or extension cable. I've used an Edimax AC-1200, which at long last has a decent El Capitan driver available. If you'd like WiFi, for the moment, you'll need a USB adapter. HDMI audio (no HDMI audio for Skylake integrated graphics yet).SD card reader (few PCIe card readers supported).WiFi - driver development underway but will take a while to come to fruition.See this post.īuilt-in hardware that doesn’t work due to lack of OS X drivers: If you dual boot, you may get it fully working by configuring Bluetooth in Windows and then rebooting to OS X without unplugging the machine. Driver loads but doesn't pair, probably due to requiring firmware. m.2 SSDs including SATA, PCIe, and NVMe.Video via HDMI (including 4K at 3840x2160 or 1080P retina, but NOT higher retina settings).Video via mini-DisplayPort (including 4K at 3840x2160 or 1080P retina, but NOT higher retina settings).(There is an effort underway to port a driver, but it's a long-term kind of thing.) The major problem is that all present Skylake models include soldered WiFi/Bluetooth, and at least the WiFi part of that does not yet have OS X drivers. Overall, with the latest BIOS and OS X, the NUC works quite well. You should install OS X 10.11.4 or higher to avoid problems with the integrated graphics (this guide last updated for 10.11.6). Other NUC guides, in case you're not looking for the Skylake model:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |